www.vanco1.com
800.626.6445
5
PANEL DESCRIPTIONS
1
2
6
1. Micro USB C: Plug in included power cable and adapter, cable can also be connected to a PC for available
firmware updates
2. Power LED: Solid and on when power is being provided to the unit
3. RX Signal: Solid and on when a device is powered on, connected, and passing signal from the HDMI
output port
4. HDMI Input: Connects to HDMI source
5. Stereo IN: Connects to a secondary analog audio source via 3.5mm
6. Source Sensitivity: Acts as a gain for the Stereo Input
4
1. Audio Time Out: Sets the time after the secondary audio signal is no longer present to switch back to
HDMI audio. Setting of 0 means it will instantly switch back; setting of 7 means after 7 seconds the
audio will switch back to HDMI audio
2. F/W UPDATE: when switch is set to the right, it is in normal operating mode. When switch is set to the
left, the device is set to firmware mode
3. HDMI OUT: Connects to an HDMI display
4. RESET: Press and release to reset and power cycle device
5. TX Signal: Solid and on when HDMI input is connected, powered on, and sending a signal
Front Panel
Back Panel
3
5
1
2
4
3
5
