800.626.6445
3
INTRODUCTION
FEATURES
4K HDMI® Extender with Digital Audio Breakout, HDMI Loop-Out,
IR and PoE
Part # EVEX4K70
•
Allows HDMI audio/video signals to be transmitted using a single Cat6/6A/7 Cable
•
Extends 4K@60Hz, 4:4:4, and HDR10 up to 230ft/70m and 1080p up to 330ft/100m
•
Features bi-directional Power over Ethernet (PoE) technology which transmits power over Cat6, allowing
the transmitter and receiver to be powered off of a single power supply
•
Supports multiple audio formats such as (Dolby TrueHD 7.1CH/Dolby Digital 5.1CH)
•
Dynamic EDID for compatibility and plug and play operation
•
HDMI loop-out for local monitoring or use with other HDMI distribution products
•
Digital optical audio breakout for audio extraction
•
Supports bi-directional IR (20~60KHz) for source or display control
•
Slim and compact design
•
Dimensions: 4.2” x 3.9” x 1” (106.0 x 99.0 x 26.2mm)
•
Patent No. 9,710,038 B1
The Evolution by Vanco EVEX4K70 HDMI Extender over single Cat6 with Digital Audio Breakout, HDMI Loop-out, IR, and PoE,
extends 4K@60Hz, 4:4:4 Chroma, and HDR10 up to 230ft/70m. Vanco’s patented bi-directional Power over Ethernet (PoE)
Technology transmits power over Cat6, allowing either the Transmitter or Receiver to be powered without the use of a power
supply for an easy installation. The transmitter is equipped with an HDMI loop-out for local monitoring or use with other
distribution products. The receiver features digital optical output to break multi-channel audio out to amplifiers for a better
listening experience. No EDID or EQ adjustments are necessary as the units automatically adjust for compatibility and gain.
In addition, bi-directional IR pass-through allows for source and/or display control. For extending full 4K resolution with up to
60Hz, 4:4:4 chroma subsampling, and HDR10, with options for connecting additional displays and breaking out audio, the
EVEX4K70 is a great plug and play solution for connecting the latest components!
The EVEX4K70 includes two units: transmitting unit (EVEX4K70-TX) and receiving unit (EVEX4K70-RX). The transmitting
unit is used to capture the HDMI input with IR signals and carries the signals over a single Cat6 cable. The receiving unit is
responsible for equalizing the transmitted HDMI signal and reconstructing IR signals.
*NOTE – All specifications and ratings for the EVEX4K70 have been tested and confirmed using Cat6 cabling. Cat6 or better
is strongly recommended for optimum performance, achieve rated distance, and to maximize resolution capabilities of this
product. Cat5e is not recommended and may not achieve distance and/or resolution expectations.
PACKAGE CONTENTS
•
EVEX4K70 (TX & RX)
•
(1) IR Receiver
•
(1) IR Emitter
•
Mounting Hardware
•
(1) DC 12V, 1A Power Supply
•
Product Manual
