www.vanco1.com
800.626.6445
3
INTRODUCTION
FEATURES
4K HDMI® over Single Cat5e/Cat6 Cable Extender
Part # EV4K2006
•
Allows HDMI audio/video signals to be transmitted using a single Cat5e or Cat6 Cable
•
Transmission Range: Extends 4K@60Hz, 4:4:4 Chroma up to 164ft/50m and 4K@30Hz, 4:4:4 Chroma
and HDR up to 130ft/40m over a single Cat5e/6 cable
•
Features Power over Ethernet (PoE) Technology which transmits power over Cat5e/Cat6, allowing the
transmitter and receiver to be powered off of a single power supply
•
Wideband Bi-directional IR system allowing for control of source or display (IR accessories included)
•
Wideband IR signal from 20KHz to 60KHz
•
Features Auto EDID and EQ Management for plug and play installation
•
HDR10 Compatible
•
Works with HDMI and HDCP compliant devices
•
HDCP 2.2 compliant
•
Slim and compact design
•
Pure uncompressed 7.1ch digital audio
•
Supports DTS-HD and Dolby TrueHD high bit rate audio
•
Dimensions: 2.7” (68.58mm) W x .7” (17.78mm) H x 3.25” (82.55mm) D
The Evolution by Vanco EV4K2006 HDMI Extender over Single Cat5e/6 with Bi-directional IR, auto EDID/EQ, and Bi-directional
PoE extends 4K ultra high definition video with HDR and audio signals, IR, and power. Extends 4K@60Hz, 4:4:4 Chroma
Subsampling and HDR up to 164ft/50m, and 4K@30Hz, 4:4:4 Chroma Subsampling, and HDR up to 130ft/40m. Bi-
directional Power over Ethernet (PoE) Technology transmits power over Cat5e/6, allowing either the Transmitter or Receiver
to be powered without the use of a power supply. No EDID or EQ adjustments are necessary as the units automatically
adjusts for compatibility and gain. This extender set also features a newly redesigned slim and compact chassis for easy and
flexible installations. This product fully supports DTS-HD and Dolby TrueHD audio formats and is HDCP compliant. In addition,
bi-directional IR pass-through allows for source or display control. For extending HDMI over a single Cat5e/6 with IR at a long
distance, with Power over Ethernet, the EV4K2006 is a great plug and play solution!
The EV4K2006 includes two units: transmitting unit (EV4K2006-TX) and receiving unit (EV4K2006-RX). The transmitting unit
is used to capture the HDMI input with IR signals and carries the signals via one cost effective Cat5e/6 cable. The receiving
unit is responsible for equalizing the transmitted HDMI signal and reconstructing IR signals. The EV4K2006 offers the most
convenient solution for HDMI extension over a single Cat5e/6 with Power over Ethernet and is the perfect solution for any
application.
