background image

15

Limited Warranty

With the exceptions noted in the next paragraph, Vanco warrants to the original purchaser 

that the equipment it manufactures or sells will be free from defects in materials and 

workmanship for a period of two years from the date of purchase. Should this product, in 

Vanco’s opinion, prove defective within this warranty period, Vanco, at its option, will repair 

or replace this product without charge. Any defective parts replaced become the property 

of Vanco. This warranty does not apply to those products which have been damaged due to 

accident, unauthorized alterations, improper repair, modifications, inadequate maintenance 

and care, or use in any manner for which the product was not originally intended.

 

Items integrated into Vanco products that are made by other manufacturers, notably 

computer hard drives and liquid crystal display panels, are limited to the term of the 

warranty offered by the respective manufacturers. Such specific warranties are available 

upon request to Vanco. A surge protector, power conditioner unit, or an uninterruptible 

power supply must be installed in the electrical circuit to protect against power surges.

 

If repairs are needed during the warranty period, the purchaser will be required to provide 

a sales receipt/sales invoice or other acceptable proof of purchase to the seller of this 

equipment. The seller will then contact Vanco regarding warranty repair or replacement.

TECHNICAL SUPPORT  

In case of problems, please contact Vanco Technical Support by dialing 1-800-626-6445. 

You can also email technical support issues to

 [email protected]

. When calling, 

please have the Model Number, Serial Number (affixed to the bottom of the unit) and 

Invoice available for reference during the call. Please read this Instruction Manual prior to 

calling or installing this unit, since it will familiarize you with the capabilities of this product 

and its proper installation. All active electronic products are 100% inspected and tested 

to insure highest product quality and trouble-free installation and operation. The testing 

process utilizes the types of high-definition sources and displays typically installed for 

entertainment and home theatre applications. For additional information please visit 

www.

vanco1.com

.

LIABILITY STATEMENT 

Every effort has been made to ensure that this product is free of defects. The manufacturer 

of this product cannot be held liable for the use of this hardware or any direct or indirect 

consequential damages arising from its use. It is the responsibility of the user and installer 

of the hardware to check that it is suitable for their requirements and that it is installed 

correctly. All rights are reserved. No parts of this manual may be reproduced or transmitted 

by any form or means electronic or mechanical, including photocopying, recording or by 

any information storage or retrieval system without the written consent of the publisher. 

Manufacturer reserves the right to revise any of its hardware and software following its 

policy to modify and/or improve its products where necessary or desirable. This statement 

does not affect the legal rights of the user in any way.

Содержание Beale Street Audio BAV4250

















Отзывы: