9
Connect and Operate
1. Ensure power is off or power supply disconnected from the BAV2500 or
BAV4250
2. Connect your input(s) using either the unbalanced RCA ports or the
balanced 3-pin screw-down connector
3. Connect the speakers to the numbered outputs on using the 2-pin
screw-down connector
NOTE: Default setup has the speakers set to 70v. If you are using 4/8 ohm speakers OR
100v speakers, you need to change the output to the correct setting using the front panel
menu or the browser-based GUI BEFORE you connect speakers and power on the amplifier
4. OPTIONAL: If using TCP/IP control or the browser-based GUI, connect a
known working Ca5e/6 cable to the RJ45 port from the network router
or switch.
5. Connect the power supply into the power input port 8. Power on
attached audio devices and test
BAV4250
Audio Speaker
BAV2500
Audio Speaker
