www.vanco1.com
800-626-6445
3
FEATURES
HDBT4x3 is a professional HDBaseT Matrix Switcher that consist of the following inputs and outputs, 4 HDMI
IN (4kx2K@60Hz signal at max), 3 IR IN, 1 IR EYE, 4 IR OUT, 3 HDBaseT OUT, 1 HDMI OUT, 1 SPDIF OUT, 1
L&R RCA OUT, and TCP/IP, RS232 control port via phoenix connector. The HDBaseT Receiver is an HDBaseT
Receiver that consists of the following inputs and outputs, 1 HDBaseT IN, 1 IR IN, 1 IR OUT and HDMI OUT.
The receiver is powered directly by the Matrix Switcher. All HDMI inputs can be selected by either the front
panel buttons, IR, RS 232 or GUI. The selected source is delivered to HDBaseT zoned outputs 1~3 & HDMI
Output. The Matrix Switcher is capable of delivering 4K signals up to 40m, 1080p up to 70m and powering
the receivers via a single CAT5e cable. It is however recommended to use good quality CAT6 cable. This
Matrix Switcher also supports EDID management and is HDCP 2.2, 1.4 compliant. Audio sources can be
selected via RS232 commands and TCP/IP at the Matrix Switcher or by 3rd Party control.
4x3 HDBaseT™ Matrix Selector Switch with Additional
HDMI® Output
Part # HDBT4X3
•
HDBaseT Matrix that features 3 HDBaseT outputs and 1 HDMI output
•
Quick install kit includes 3 HDBaseT PoC receivers, 4 IR Emitter and Receiver sets and IR remote control
•
Supports HDCP 2.2, and is backwards compatible with previous version of HDCP and HDMI
•
Transmits 4Kx2K @ 60Hz 4:2:0 up to 26 ft (8m) via HDMI port and 131 ft (40m) via HDBaseT port
•
3 HDBaseT outputs with distances up to 230 ft (70m) at 1080p and 131 ft (40m) at 4Kx2K on a single
Cat5e/6 cable
• HDBaseT Receivers are powered by the matrix using PoC technology • LED indicators show real-time
switching status
• Controllable via front panel, RS232, IR and TCP/IP • Supports bi-directional IR & RS232 control
•
Built-in GUI for TCP/IP control and setup
•
Powerful EDID management
•
Features Micro USB port for firmware upgrades
•
Easy installation with rack-mounting design, mounting hardware included
•
Power Supply : Matrix Unit, DC 24V; Receivers, PoC
•
Matrix Dimensions: 14.2” W x 1” H x 5.9” D
•
Receiver Dimensions: 2.4” W x .9” H x 4.7” D
•
4K HDBaseT Matrix Switcher
•
(3) HDBaseT Receivers
•
(4) IR Emitters (Optional)
•
(3) IR Receivers (Optional)
•
IR Receiver(Inserted into IR EYE port)
•
IR remote
•
RS232 cable (Phoenix to 9-pin D-Sub)
•
Mounting ears & Screws
•
(4) Trapezoidal Plastic pads (For 4K HDBaseT
Matrix Switcher)
•
(12) Round Plastic pads (For HDBaseT
Receivers)
•
Power Adapter (DC 24V 2.71A)
•
Power Cord (Optional)
•
Product Manual
PACKAGE CONTENTS
Please check the packaging and make sure the following items are contained in the shipping carton:
