www.vanco1.com
800-626-6445
8
REMOTE CONTROL
1. Press this button to power on the matrix or set it to standby mode.
2. Press these button to select an input (1,2,3,4) for a specific output
(A,B,C,D)
IR CONTROL SYSTEM
1. The IR control receives an IR signal from TV end to control the source (Blu-ray DVD), and video switching
performed by the matrix.
2. At the matrix: Insert the 3.5mm jacks of the IR TX Emitters included with the unit into the IR TX Emitter
ports at the rear of the matrix according to input. It is important to match the input number with the
correct IR TX Emitter port. For example, if the user is watching a Blu-ray connected to input 1, the IR
signal will be directed through the IR TX1 socket to control the device.
3. Some later adjustment may be needed to the location of the sensor to achieve the best performance
results - sometimes moving the sensor to different areas on the source can improve IR performance.