Vanco 280568 Скачать руководство пользователя страница 7 | Manualshive

Страница: 7 / 16

Vanco 280568 Скачать руководство пользователя страница 7

www.vanco1.com

800-626-6445

7

CONNECT AND OPERATE

1. Connect up to 4 sources such as a Blu-Ray Player, game console, A/V Receiver, Cable or Satellite

Receiver, etc. to the HDMI inputs on the unit. Insert and extract cables carefully with the power switched
off. Connecting and disconnecting while the unit is powered can result in damage to circuitry.

2. Connect the Coax output connector (BNC) to the Coaxial receiver, and connect the Coaxial receiver HDMI

output connector to an HDMI equipped display

3.  OPTIONAL: Connect the IR receiving extender to the IR EXT port on the matrix.
4.  OPTIONAL: Connect an Ethernet cable from the TCP/IP port on the matrix to a local Area Network.
5.  OPTIONAL: Connect an RS-232 cable from the RS232 port on the matrix.
6.  OPTIONAL: Connect the IR emission extender to the IR output port on the matrix, and the IR receiving

extender to the Coaxial receiver IR RX port.

7. Connect the DC 12V Locking power supply to the power receptacle on the matrix.
8. Connect the power supply to an available electrical outlet.

«
...
5
6
7
8
9
...
»

Содержание 280568

















Отзывы:

Нет отзывов