825VST System Specifications
WEIGHT RANGE
453KG / 1000LB*
DISPLAY RESOLUTION
0.1KG / 0.1LB
ACCURACY
0.1% + /- 1 DIGIT OF READING
DISPLAY TYPE
LIQUID CRYSTAL DISPLAY
SIZE
3” X 3” X 4”
WEIGHT
1 POUND
POWER SUPPLY
9-VOLT LITHIUM BATTERY
BATTERY LIFE
APPROX. 3000 READINGS
*Do Not Exceed Lifter Capacity
Battery Replacement
A single
AA
battery powers the 825VST Scale System. This battery should provide
approximately *3000 readings before needing replacement.
When battery replacement is needed, an indicator will appear on the display. Simply
remove the two screws on the case to access the battery.
*3000 READINGS OBTAINED WITH 9-VOLT LITHIUM BATTERY
NOTE:
The Load Cell contains no user serviceable components and should be serviced by
authorized personnel only. Any unauthorized tampering will void the warranty.
If you should have any questions or comments regarding the operation of the 825VST
please call your local distributor.
Safety Alert!
It has been brought to our attention that the hanging VANDERSCALE to be installed on your
VANDER-LIFT II
TM
can become lodged on the boom, thereby causing inaccurate weights.
The potential also exists that when so lodged it may break the safety pin, thereby causing
the scale to unhook.
THIS COULD CAUSE AN INJURY TO A RESIDENT AND/OR STAFF
MEMBER.
Shown below is a part called a bushing. This part is designed to help prevent this problem
from occurring.
Installation of Bushing / IMS & SR Scales
FLAT HEAD SCREW (Steps 1 & 3)
BUSHING (Step 2)
(Patent Pending)
Step 1: Use a standard screwdriver and remove flat head screw.
(See above)
Step 2: Slide Bushing into place as shown above.
Step 3: Replace flat head screw and tighten firmly.
41
November 2017
For your nearest Distributor call, 1-800-694-4525
41