Vancare VANDER-LIFT II B450 Скачать руководство пользователя страница 39

Страница: 39 / 43

3. Make sure the sling is empty and press the “ON/ZERO” pad. The indicator will count

down from -

- to -0- while taking readings and store the zero point. When finished,

the indicator will show the “C25” message.

4. Place a 25 lb test weight in the sling and press the “ON/ZERO” pad once again. The

indicator will count down from -

- to -0- while taking readings and calculate and store

the span calibration. The indicator then automatically returns to the normal weighing

mode. Calibration is now complete.

Hanging VANDERSCALE

IMS

Installation

1. Attach the

VANDERSCALE

to the

VANDER-LIFT II

per the Lift Manufacturer’s

instructions.

2. Hang the spreader-bar assembly from the

VANDERSCALE

per the Lift Manufacturer’s

instructions.

Operation

1. To turn on the scale, press the “ON/ZERO” pad. The display will perform a startup

sequence, showing the firmware version (V 1.0) and the current battery voltage (b 9.0),
then settle on some weight.

2. Place the sling onto the spreader bar. Make sure that no part of the sling or spreader-

bar is touching the floor or any object. Press the “ON/ZERO” pad to zero the display.

The display will show the word “Zero” while the pad is pressed, then will

count down

from -3- to -0-.

3. Place the sling around the patient per the Lift Manufacturer’s instructions. Lift the

patient clear of all contact with the bed/chair. Read the patient’s weight on the scale

display

If the

display turned off before lifting the patient, simply press the “ON/ZERO”

pad to turn the

scale on and read the weight (be careful to press the “ON/ZERO” pad

only once to turn

the scale on, or the display may be inadvertently zeroed while the

patient is in the

sling).

4. To change the display unit from lb to kg or from kg to lb, press and hold the “LB/KG”

pad for approximately 3 to 4 seconds. The display will show the “conv” message then

blank and the unit annunciator will change from LB to KG or from KG to LB. Release the
“LB/KG” pad after the unit annunciator changes.

5. To recall the last patient’s weight, the scale must first be turned on. Press the center of

the “VANCARE” logo to the left of the “ON/ZERO” pad on the front of the scale. The
display will show the message “rECL” then alternately flash between the stored weight

and the “rECL” message.

6. If the battery symbol appears, replace the battery with a

alkaline battery. The

battery access cover is on the

bottom

of the scale.

November 2017

For your nearest Distributor call, 1-800-694-4525

Содержание VANDER-LIFT II B450












































Результаты поиска

Содержание VANDER-LIFT II B450

Отзывы:

Похожие инструкции для VANDER-LIFT II B450

Бренды по названию

Популярные бренды

Vancare VANDER-LIFT II B450, Руководство по эксплуатации

Результаты поиска

Содержание VANDER-LIFT II B450

Отзывы:

Похожие инструкции для VANDER-LIFT II B450

Бренды по названию

Популярные бренды