AIR N ARC
®
150 SERIES
SECTION 2: SPECIFICATIONS
090043-OP_r0 (MARCH -2015)
PAGE - 11
VANAIR MANUFACTURING, INC.
(800) 526-8817 • www.vanair.com
SECTION 2:
SPECIFICATIONS
TABLE 2A: WELDER, GENERATOR, AND ENGINE SPECIFICATIONS
SYSTEM INFORMATION
SPECIFICATION
Rated Welder Output
150A High Frequency DC/CC; 100% Duty Cycle @ 150 Amps
Welding Leads
25 or 50 Ft Optional (Refer to Section A.5 for Optional Parts Listing)
AC Generator
4,200 Watts Continuous Duty
AC Generator 120V Power Rating
60 Hz 1 PH, 20 Amp Circuit
AC Generator 240V Power Rating
60 Hz 1 PH, 20 Amp
Battery Charger Capacity
12V Charge, 12V Boost, 24V Boost
Engine
19 HP
I
Engine Oil Capacity
Two (2) Quarts 10W30 (Refer to Engine Operator’s Manual for Extreme Conditions)
Fuel Consumption
1.5 GPH at Full Engine Speed/Load 9.6 Hour Runtime w/ 12 Gallon Tank
Fuel Tank Capacity
4.5 Gallons or 11.5 Gallons
Fuel Type
86 Octane or Higher Unleaded Gasoline
II
Operating Temperature Limits
0°F to 110°F
III
I
For in-depth specifications and requirements regarding the Kohler
®
19 HP engine, refer to the Engine Operator’s
Manual.
II
Ethanol blended fuels, such as E85, are prohibited for use with the Kohler engine.
DO NOT
use ethanol-based fuels.
III
With cold weather kit, temperature range expands to -40° below.
TABLE 2B: SPECIFICATIONS — AIR COMPRESSOR
COMPRESSOR INFORMATION
SPECIFICATION
Compressor Type
Reciprocating, single-stage
Air Compressor Capacity
20 CFM @ 100 PSI
Inlet Control
Zero (0) No Load / 100% Load
Air Filter
Pleated Paper, Dry Type, and Pre-Filter
Oil Capacity/Type
New:
3 Quarts /
Service:
24 ounces
Vanguard™ Premium Reciprocating Synthetic Oil
Air Tank Capacity
Eight (8) Gallons, Thirty (30) Gallons or Remote Tank
Tank Pressure Rating
200 PSI
Safety Relief Valve Setting
150 PSI
Electrical System
12 VDC
Instrument Gauges
Pressure and Hour Meter
Adjustable Air Pressure Control
Settings
Cut-in Pressure: 90 PSI / Cut-out Pressure: 125 PSI
Air Service Outlets
Two (2) on Control Panel - Remote, One (1) on Machine - Standalone
