SECTION 5: MAINTENANCE
AIR N ARC
®
150 SERIES
PAGE - 40
090043-OP_r0 (MARCH - 2015)
VANAIR MANUFACTURING, INC.
(800) 526-8817 • www.vanair.com
tabs are facing inward toward the
pulley, and the arrows on the belt
point in the same direction as the
arrow of rotation on the
compressor pulley (see
Figure 5-
4
[
D
]).
3. Start at the bottom edge of the
pulley as per
Figure 5-7, Step
#1
. Continue to set the belt into
the proper groove on the
compressor pulley and engine
pulley.
KEY
DESCRIPTION
KEY
DESCRIPTION
A
TAB
D
THUMB (pushing on link end)
B
LINK END
E
TOP VIEW: tab pivoting into link slot
C
THUMB (pushing on tab)
F
TOP VIEW: twist tab to lock the link in place
Figure 5-6: Attaching Compressor Belt Link
E
C
D
C
D
A
B
3
2
1
B
A
90°
F
KEY
DESCRIPTION
KEY
DESCRIPTION
1
Start at bottom edge of compressor pulley: Set belt into
groove, and grasp both the belt and the pulley edge
3
E
Hold the belt firm enough so that it does not
slip from the engine pulley. Move the belt to
align with the compressor pulley groove as it
is being rotated.
2
Rotate the pulley clockwise, while still holding the belt in
place.
Figure 5-7: Compressor Drive V-Belt - Removal/Attachment
3
2
1
