15
If possible lubricate with Total Lical EP/ ELF EPEXELF 2 or an equivalent grease.
Viscosity base oil 40°C 190 - 220 Cst.
Thickener Lithium/Calcium compatible.
Temperature range -25°C tot 130°C
Good pressure properties.
1.11 Important advises
1.11.1 Winter services
It is important when taking the mower out of service for a longer period, to carry out the following:
-
Release tension of V-belts
-
Re-new the gearbox oil (see chapter 1.5)
-
Replace the flails if necessary
-
Check which parts have to be replaced or repaired
-
Wash and clean the machine completely, lubricate the bearings and store it in a dry place.
1.11.2 Repair
Urgent repairs and parts supplies are expensive. Why not use the winter (quite) months to bring your machine in a
”PERFECT“
condition for the next season.
1.11.3 Torque Moments bolt connections
Bolt connections must through, DIN 267, following list tightened, although is remarked in the manual or parts list.
Size
Moment Nm, Class 8.8
Moment Nm, Class 10.9
M8
25
35
M10
50
70
M12
85
120
M14
135
190
M16
210
300
M18
290
410
M20
410
570
1.11.4 Caution
No persons, other than the tractor driver, should be near the mower (minimum distance 100 m) whilst it
is in operation. Never walk close to the rear of the machine.
The tractor driver should
never
leave the tractor seat before disengaging the tractor P.T.O. shaft,
stopping the engine and pulling the tractor key out.
Never remove guards when the machine is operating.
Never touch the machine before being for 100 % sure that all parts ( P.T.O. shaft, blades, belts and
pulleys) have stopped rotating.
