Van Medevoort MP470, Инструкция по эксплуатации

Страница: 6 / 9

vM MP470 MEDIA PLAYER
5
Controls
Precautions
Connections
Maintenance and advice
Technical Specifications
7 8 9 10 11 12 13 14
7. In / Outputs MB. All MB (mother board) in and outputs are located in this area, see image
below and the extended manual for all connections, features and specifications.
8. Output digital SPDif coaxial. Connect to the DA converter, RCA SPDif input.
9. Output digital Q-Link. I2S for PCM or DSD native to connect with the new vM DA converters
or other converters with DSD input. There are four RCA connectors: for PCM the DATA,
LRCK and BCK. For DSD native the DSD1, DSD2, DSDCK and I/O to switch the new vM DA
on to DSD when there is the correct DSD signal at the output. Connect these to the same
named connectors on the DA converter. Take care to use the right signal direction of the
cables! This signal direction is indicated with arrows on the vM Silver Cables.
For best audio results, it is important to use four identical digital cables of good quality.
10. Output digital SPDif XLR (AES/EBU) balanced. Connect to the DA converter XLR input.
11. Output Analog. These Analog outputs go to the inputs of the stereo (pre) amplifier. The white
(top) one is for the left channel, the red (bottom) one is for the right channel.