background image

vM MP470  MEDIA PLAYER

 

 

 

 

 

 

 

 

Controls 

 

 

Precautions 

 

 

Connections 

 

 

Maintenance and advice 

 

 

Technical Specifications 

 

 
 
 

  Please read after this start up manual, also the extended user manual which you can find on the 

desktop. Here you can read all other info and tips to use hard- and software with maximal results 
and quality.

 

 

  The digital outputs are clocked for the different digital inputs.  

By switching over between outputs, a synchronicity moment can occur.  
We strongly advise to restart the MP470 for best performance/results after switching. 

 

  All DVD and Blu-ray disks can be played when they are produced with the appropriate format / 

protocols. 

 

 

All audio CD’s, CD-R’s and CD-RW’s can be played when they are produced following the Red 
Book protocol. 
 

  For your convenience you will find a red sticker, indicating the mains 

“phase”. The phase of your 

electricity system can be determined with a mains voltage seeker.  

 

  Clean the player only with a cloth, impregnated with a Ph-neutral cleaning fluid. And it must be 

mildly moist! NEVER use strong fluids and/or erasers. Before cleaning ALWAYS remove the power 
cord from its wall socket, by its plug not by its cord. 

 

  The optimum operating temperature is reached after approx. 60 minutes of continuous play. Then it 

will be possible to start enjoying the superb van Medevoort audio and video qualities of this media 
player.  

 

  Only to protect against over-temperature (above 60 degrees Celsius), this player is equipped with 

an active cooling system. Within normal use, all cooling (CPU and PSU) is passive. 
Therefore, place the player on a location with enough free space above and rear for ventilation to 
regulate / reduce temperature. If the temperature exceeds 70 degrees Celsius, the safety 
protection is switched on, the system is switched off and the top LED (2) is blinking. 
 

  We strongly recommend that you use high quality interconnect cables and power cord. E.g. the 

audiophile van Medevoort Silver Cable. 
 

 

For other questions, please contact your local dealer.

 

 

 
 

Содержание MP470










Отзывы: