Van Der Stahl OPL Series, Руководство по эксплуатации

Страница: 19 / 60

OPL (USA) Series Operating Instructions Ver. 3.02E
19
1 Air pedal operation
2 Table-switch operation
3 Auto-cycle mode
Manual operation or automatic operation is selected by
the “AUTO CYCLE ON/OFF” button in the control
unit.
After setting the mode at “8-7 Seal parameter settings
RQWKHFRQWUROXQLW´ĺSDJH20)
, select either the ON
or OFF of the “AUTO CYCLE ON/OFF” button.
For more details, refer to “How to set each operation
mode” below.
Ɣ$872&<&/(ĺ2))
$872&<&/(,17(59$/ODPSJRHVRII
1
Air pedal operation:
Operates when stepping on the air pedal.
Operation mode OPL-200, OPL-300 series OPL-450, OPL-600 series
Air pedal operation
3XVKWKH$872&<&/(212))EXWWRQWR
turn OFF the auto cycle mode. Remove the
air pedal set to the table-switch plate. Place
WKHDLUSHGDORQWKHÀRRURUWKHRWKHUSODFH 3XVKWKH$872&<&/(212))EXWWRQWR
turn OFF the auto cycle mode. Set the air
pedal included in the accessories referring to
$LUKRVHLQVHUWLRQĺSDJH18).
Table-switch plate
operation
3XVKWKH$872&<&/(212))EXWWRQWR
turn OFF the auto cycle mode. Mount the
table-switch plate referring to "8-2 Mounting
WKHWDEOHĺSDJH17).
Table-switch plate operation cannot be
selected.
Auto-cycle mode
6HWWKHDXWRF\FOHLQWHUYDOWLPH7XUQ21WKHDXFRF\FOHPRGHE\SXVLQJWKH$872&<&/(
ON/OFF button.
Ɣ$872&<&/(ĺ21
$872&<&/(,17(59$/ODPSOLJKWV
3
Auto cycle:
Auto cycle operation is performed at the
appointed interval.
2
Table switch-plate operation:
Operates when pushing the table switch-plate.
The table-switch plate is only available for the
OPL-200/300 series.
8-6 Selecting operation method
How to set each operation mode