User manual
Green Pin T
ycan
®
Lifting Chain
• If at any place on the exterior layer of the link leg has been torn, cut or
abraded all the way through (in one or more places), and the length of
the cut(s) (individually or accumulated) is longer than 80% of the link-
width, Green Pin Tycan
®
Lifting Chain must be removed from service
immediately and shall be destroyed and not used for any application.
• If at any place on the exterior layer of the link are torn, cut or
abraded away more than 50% trough, and the area(s) is longer than
160% of the link width, Green Pin Tycan
®
Lifting Chain must be
removed from service immediately and shall be destroyed and not
used for any application.
• If there are visible cuts or abrasion of more than 1mm deep, across
all numbers of layers on the side of the link leg, Green Pin Tycan
®
Lifting Chain must be removed from service immediately and shall be
destroyed and not used for any application.
• If there are visible cuts or abrasion of more than 2mm deep, across
more than 75% of numbers of layers on the side of the link leg, Green
Pin Tycan
®
Lifting Chain must be removed from service immediately
and shall be destroyed and not used for any application.
• If there are visible cuts or abrasion of more than 3mm deep, across
more than 50% of numbers of layers on the side of the link leg,
Green Pin Tycan
®
Lifting Chain must be removed from service
immediately and shall be destroyed and not used for any application.
• If there are visible cuts or abrasion of more than 4mm deep, across
two layers or more on the side of the link leg, Green Pin Tycan
®
Lifting Chain must be removed from service immediately and shall be
destroyed and not used for any application.
• If stitching is torn/ abraded to the extent that the layers of webbing
can unravel, Green Pin Tycan
®
Lifting Chain must be removed from
service immediately and shall be destroyed and not used for any
application.
• If it is known that Green Pin Tycan
®
Lifting Chain has been exposed
to temperatures exceeding 110°C (230°F), Green Pin Tycan
®
Lifting Chain must be destroyed and not used for any application.
Details wear/tear damage
• If it is known that Green Pin Tycan
®
Lifting Chain has been in
contact with damaging chemicals, Green Pin Tycan
®
Lifting
Chain must be destroyed and not used for any application.
• If there is any doubt that Green Pin Tycan
®
Lifting Chain has
met or been exposed to the limits of the mentioned discard
criteria’s, Green Pin Tycan
®
Lifting Chain should be discarded.
• If the manufacturer’s label(s) has been removed, or is no longer
legible, Green Pin Tycan
®
Lifting Chain shall be removed from
service.
In case you do not use the products yourself but are reselling
these as part of a manufactured product, please take our general
cautions and warnings into account and make these known to your
customers as well. In any case, we do not accept any responsibility
or liability, nor can we be held responsible for any misuse or
damage with, by or at your customers due to negligent use.
