ValueJet MUTOH VJ-1938TX, Руководство для стартапов, Страница: 43 / 56

Test printing 43
After loading the media...
[1] Set the media holder at both edges of the media.
Important!
With the default settings, the printing operation starts 5 mm from the
edge of the media. To hold down the media, make sure that the part
overlapping the media is less than 5 mm in length.
[2] Lower the media setting lever.
[3] Switch the front tension unit AUTO switch depending on how you set
the media.
• OUTSIDE ROLL: When setting the outside roll media
• INSIDE ROLL: When setting the inside roll media
[4] Switch the front tension unit OPERATION switch depending on how
you set the media.
• SLACK: When using the slack take-up method
• TENSION: When using the tension take-up method
[5] Open the ink gutter cover.
Note
If the ink gutter cover isn't completely open, you cannot print.
OUTSIDE ROLL
INSIDE ROLL
TENSION
SLACK