USER MANUAL
Channel
: to select the channel you want to configure
Switch
: to enable or disable the CC function
Buzzer
: to disable or to active the buzzer to emit an alarm tone in 10, 20, 40 or 60 seconds when
the detection is triggered
Sensitive
: The sensitivity level is from 1 to 4, with a default value of 2. Higher sensitivity will be
easier to trigger the detection.
Scene
: Scene setting includes Indoor and Outdoor. Please choose the scene to match with the
place your camera installed.
Post Recording
: You can set how long after an event occurs that the DVR will continue to record.
Latch Time
: To configure the external alarm time when the detection is triggered.
Alarm Out
: If your DVR support to connect to external alarm device, you can set to emit an alarm
tone.
Show Message
:
A letter “S” will be displayed on the screen when the intelligent detection is
triggered.
Send Email:
If an alarm is triggered, an Email will be sent to your preset email account.
Full Screen:
When the detection is triggered, the channel will be enlarged into full screen.
Record Channel:
to select the channel(s) you want to record when a detection is triggered.
Area:
Click [
Setup
] to draw a virtual region in the camera picture.
1.
Choose one of the Rule Number. It is the number of virtual lines you can draw. Maximum 4
lines.
2.
To enable the detection in
Rule Switch
.
3.
Choose a
Rule Type
Object
: Will count for only moving objects.
Pedestrian
: Will count only moving people.
4.
Use your mouse to click 2 points in the camera picture to draw a virtual line. From Side A to
Side B is Enter, from Side B to Side A is Exit.
5.
Click
Save
to save your settings.
6.
If you want to modify the position or length of the line, click the red box in the line, the color of
41
