USER MANUAL
1.
Choose one of the Rule Number. It is the number of FD area. Maximum 4 areas you can set
for FD function.
2.
To enable the detection in
Rule Switch
.
3.
Choose a
Rule Type
, only Normal available for this detection.
4.
Use your mouse to click 4 points in the camera picture to draw a virtual region. The sharp of
the region should be a convex polygon. Concave polygon will be not able to save.
5.
Click
Save
to save your settings.
6.
If you want to adjust the size of the region, click the red box in the region, the borders of the
region will be changed to red color. Long press the left button of your mouse to move the
whole region, or drag the corners to resize the region.
7.
If you want to remove one of the regions from the camera picture, click the red box in the
region and then click
Remove
button. Click
Remove All
will delete all regions.
Notice:
1) The region for detection shall not be in the area that people cannot reach.
2) The region should include the complete front face.
5.1.8.6 CC (Cross-Counting)
Cross-Counting function counts the times for moving objects or people across the virtual lines.
40
