www.valuehobby.com/stylus-sport-60.html
- 13 -
Section 6: Fin, Rudder and Tail wheel
Installation
Required parts and hardware:
Fin
Rudder
Triangle Stock 2pcs
Fin mounting block
Tail wheel assembly
Step1. Locate the two triangle stock. Align one stock
with the edge of the fin. Use a felt-tipped pen to trace
the stock on the fin.
Step2. Use a hobby knife and a ruler to trim the
covering along the line drawn in the previous step.
Step3. Repeat the step 12 and 13 for the other
triangle stock.
Step4. Use the epoxy to glue two triangle stock to the
fin as shown.
Step5. Position the fin on the horizontal stabilizer. Use
a felt-tipped pen to trace the outline of the fin.
