1.1 General
1.1.1 Using the manual
General
The purpose of this manual is to assist Dealers and Agents in the installation, servicing and repair of Valtra
equipment. It is important to follow the methods shown and to use special tools in order to perform the
operations within the times stated in the repair time schedule.
Structure of the manual
Contents
For quick reference, each chapter starts with a table of contents, listing the various sections included in
that chapter.
Meaning of reference numbers
(...)
Reference number for parts
Service tools
Where the use of a service tool is necessary to carry out an operation, the tool reference is mentioned with
the relevant instruction.
Tool drawings for makeshift tools are given at the end of the relevant sections.
Repairs and parts replacement
During replacement operations, using genuine Valtra parts is essential.
Fitting parts other than genuine Valtra parts invalidates the tractor warranty and tractor safety may be
compromised. All Valtra parts are guaranteed by the manufacturer. Valtra Dealers and Agents are required
to supply genuine parts.
For repairs and for fitting replacement parts and accessories, we draw your attention to the
following points in particular:
• Legislation in certain countries prohibits the fitting of parts that do not comply with the tractor
manufacturer's specifications
• Torque wrench setting figures given in the workshop manual must be strictly respected
• Locking devices must be fitted where specified. If the efficiency of a locking device is impaired during
disassembly, it must be replaced.
1.1.2 Technical specifications
1.1.2.1 Engine
Description
A800R
A850R
A950R
A990R
Engine
AGCO Power 33CWC3
Number of
cylinders
3
Maximum power at
2200 rpm (ISO
TR14396)
78 hp
85 hp
95 hp
100 hp
4
[V]
GUID-1CA4D167-8786-429C-A675-43BEDF0CB402 [V1]
[V]
GUID-14DC7F75-D3D4-4AF0-AE4D-62312F827E42 [V2]
1. Introduction
1-3
ACX2831410
Find manuals at https://best-manuals.com
Find manuals at https://best-manuals.com
