START USING THE WIRELESS EARPIECE
1) Power On/Off
Slide down the On/Off switch to turn the wireless earpiece on.
2) Charging the wireless earpiece
Connect the USB charging cable provided to the micro USB charging port located at the top
of the earpiece. A red LED turns on during charging and turns off when it is fully charged.
When battery is low, red LED light will be flashing.
Note: Please charge the earpiece for at least 8 hours before first use. Please make sure that the earpiece is
switched off when charging is in progress.
3) Pairing the wireless earpiece (switched off)
Step 1: Activate Bluetooth function on your mobile device to begin pairing with headset.
Step 2: Press and hold the Multi-functional button till LED indicator flashes red and blue.
Step 3: Connect to the earpiece by selecting ‘Valore R551’ under the device list.
Step 4: Once connected, the LED light at the will be slow flashing blue.
Note: If the pairing is not successful, please turn off wireless earpiece first, and then re-pair again. After pairing
is successful, paired devices will remember each other. Unless pairing information is deleted because of new
pairing, no need to pair when using the next time.
If you want to pair the wireless earpiece with other devices, please turn off Bluetooth function of existing source
device, and pair the wireless earpiece with the new device according to steps 1-4 mentioned above.
4) Wireless earpiece controls
Multi-functional button
When there is an incoming call, short press this button to answer phone calls. Short press again to end call.
Long press this button to reject a call.
Long press this button to redial last remembered call.
During a call, double press this button to switch to speak through cellphone.
When playing music, short press this button to play or pause.
Volume ‘+’/ Next song
Long press to go to next song. Short press to increase volume.
