START USING THE 1080P CAR DVR
1) Switching On/Off
a) Connect the car charger and start the engine, the car camera will switch on.
b) When car engine is switch off, the car camera will turn off automatically.
c) Press the Power button to switch on the car camera manually.
Note:
1. When camera is in loop-recording mode, when the memory card is full, it will delete previous
video automatically.
2. To save/prevent any video from being deleted. Long press the MODE button on the right side
of the camera until the ‘key’ symbol shows on the top of the screen.
OR
3. Select the Menu button when in stand-by state, select the G-Sensor function. In this case,
when the car is hit, the ‘key’ symbol will be shown on the screen, preventing your videos from
being deleted.
4. Protected files will be stored under EMERGENCY/DCIM file in your memory card.
2) Shortcut key function
a) Press the Down button to turn off audio recording
b) Press MODE button to lock/unlock files
3) Battery indicator
Full battery Slightly low battery low battery battery empty
4) Previewing playback
1) When the recording stops, press the MODE button and Menu button to enter into the
playback mode.
2) Press the UP/DOWN to select the files you want to delete
3) Press REC to select to delete the single or the All.
