START USING THE WIRELESS EARPHONES
1) Charging the wireless headset
Connect the USB charging cable to the earphones located side of the controls. When red
LED turns blue, charging is complete.
Note: Please charge the earphones for at least 8 hours before first use. Please make sure that it is switched off
when charging is in progress.
2) Pairing the wireless earphones (switched off)
Step 1: Activate Bluetooth function on your mobile device to begin pairing with earphones.
Step 2: Switch on the wireless earphones. (Earphones will enter pairing mode automatically)
Step 3: Connect to the earphones by selecting ‘Valore BTS25’ under the device list.
Step 4: Once connected, the LED light at the Bluetooth button will blink blue in interval of 5
seconds.
Note: If the pairing is not successful, please turn off wireless earphones first, and then re-pair again. After
pairing is successful, paired devices will remember each other. Unless pairing information is deleted because
of new pairing, no need to pair when using the next time.
If you want to pair the wireless earphones with other devices, please turn off Bluetooth function of existing
source device, and pair the wireless earphones with the new device according to steps 1-4 mentioned above.
3) Wireless earphones controls
Hang up call: Short press Multifunctional button
Rejecting call: Double press Multifunctional button
Play/Pause/Answer: Short press Multifunctional button
Volume up: Short press
Volume down: Short press Volume -
Previous track: Long press Volume -
Next track: Long press
Chinese/English language switch: At the pairing status, long press Multifunctional button and
simultaneously about 1 second
