12
Reinstall the Burner Module
Note: If the circulating fan is to be installed, it should be done at this point before installing the burner
module. See instructions packaged with the fan for installation details.
Reinstall the burner module using the 4 screws removed previously.
Note: The upper baffle may be removed to gain more room for the screwdriver to install the rear screws.
Connect the Gas Line and Test-Fire the Unit
Connect the gas line to the burner module. Check for leaks, purge the line and, test-fire the unit before installing the win-
dow or proceeding with the remainder of the install. See
Lighting Instructions
section.
Reinstall the Top Baffle
(if removed)
Install Top Convection Baffle
Position the firebox
as far back as possible within
the existing fireplace
to allow ample space at the
front for the fret.
Position the top convection baffle with the threaded
studs pointing downwards into the slots at the top of
the firebox.
Slide the convection baffle as far forward as
possible and tighten the wingnuts.
Reinstall Burner
Module (4 screws)
Edge Fits into
Cleat at Back
Remove Top Baffle
(2 screws)
Remove Top Baffle (optional)
(to provide space for a screwdriver)
Edge fits into
Cleat at Back
of Firebox
Reinstall Top
Baffle (2 screws)
Con
vection B
affle
Wingnuts(2)
Start Wingnuts an Studs.
Slide Convection Baffle
into slots. Adjust
Baffle Forward to Touch
Back of Smode Curtain of
Existing Fireplace.
Tighten Wingnuts.
Firebox Installation
Содержание Retrofire F24BN
Страница 24: ...24 Parts...