9
8. LOG INSTALLATION
8.1
Place the rear log (the log with only one short stub)
in the retaining cradle behind the rear burner tube with
its back against the firebox back wall (fig. 11). The short
stub should be at the top right of the log. Center the
log so that the gap to the firebox walls is the same at
each side.
8.2
Place the front log on the retaining cradles between
the rear and front burner tubes (fig. 12). Center the log
so that the gap to the firebox walls is the same at each
side.
8.3
Place the cross log in position (see fig. 13). The
front of this log is indicated by the letter “F” embossed
on its underside. Make sure that the front of the log is
seated inside the follow in the front log and is not raised
in front of it.
8.4
Replace the window unit. Locate its bottom edge in
the support channels at the firebox sides. Refit the
knurled screws at the sides near the top.
Fig. 11 Rear log location
Fig. 12 Front log location
Fig. 13 Cross log location