7
Top Casting
Place the top casting piece on the top of the stove
ensuring the rear edge is flush with the rear edge of the
cast side panels. Fill in the vent space with the infill plate
if using a rear vent. To level the top casting, unscrew the
levelling bolts on the top rear of each casting side panel
as appropriate.
Removeable Fret
(Arched Front only)
To access the gas valve and the remote control receiver,
the fret can be removed without removing the front
casting. Once
the stove has cooled down and with
extra care not to hit the glass of the window,
simply
slide up the fret out of its brackets, angle it up and
remove it. To put it back in place, proceed in the reverse
order.
Barrier Screen
(Arched Front only)
Install the barrier screen to the front of the Madrona
stove.
1. Insert the top clip in the top of the opening of the
cast front.
2. Push the sides of the screen against the front so the
side clips hook to the front.
Maintenance
Cast iron stove body
The matte cast body (MFCS01) can be cleaned with
a soft brush. The enamel cast body (MFCS02) can be
cleaned with a damp soft lint-free cloth.
Barrier screen
Remove the barrier screen by pulling the top first then
the bottom. Dust down using a brush.
If the barrier becomes damaged, the barrier shall
be replaced with the manufacturer’s barrier for this
appliance.
Window and fireplace
See the
Owner’s Information
section in the Madrona
MF28 fireplace
Installation and Owner’s Manual
for
instructions on cleaning the window and fuel bed.
Hooks (2)
Fret Mounting
Brackets (2)
1
2
2
WARNING
DO NOT TOUCH THE BARRIER SCREEN OR
STOVE WHILE THEY ARE HOT! Let the stove
cool first before maintenance.
FOR YOUR SAFETY, ensure the barrier
screen is re-installed on the stove front
after maintenance, before use.
