30
Electrical Wiring
Installation
6. Connect like wires using supplied terminal blocks.
7. Screw the cover plate back onto the
fi
replace, and
tighten the strain relief.
8. The plug-in outlet within the
fi
rebox is now ready to
provide power to the V-module (already plugged in).
V-module location
(attached inside panel)
Accessing Junction Box After Finishing
To access the electrical junction box after wall
fi
nishing is
complete and the
fi
replace is operational, you must
remove the bottom plate.
This will give you partial access to the front of the
junction box (enough to plug in), but it will be partly
obscured by the vertical plate.
To gain complete access, also remove the top plate (3
screws) and vertical plate (2 screws).