Valor Homeflame Dream, Инструкция по установке и эксплуатации, Страница: 6 / 66

INSTALLER GUIDE
Page 6
CONTENTS (Continued)
Section Heading Page
10. BURNER AND SUPPLY PIPE INSTALLATION 28
10.1 Burner and supply pipe installation. 28
10.2 Preliminary burner checks. 28
10.3 Inlet pressure check. 29
11. FITTING THE CERAMIC FUEL EFFECT 29
12. FITTING THE WINDOW FRAME ASSEMBLY 30
13. OPERATING AND SPILLAGE CHECKS 30
13.1 Checking the control settings. 30
13.2 Check for spillage. 31
13.3 Flame supervision and spillage monitoring system. 32
14. FASCIA FITTING 33
14.1 Homeflame Dream/Masquerade/Excelsior/Classica models. 33
14.2 Homeflame Harmony model. 35
14.3 Homeflame Petrus model. 35
15. FINAL REVIEW 37
16. SERVICING & PARTS REPLACEMENT 38
16.1 Checking the aeration setting of the burner. 38
16.2 To remove the ignition microswitch. 39
16.3 To remove the gas shut-off microswitch. 39
16.4 To remove the fascia. 39
16.5 To replace the control slide unit. 40
16.6 To replace the control slide button. 40
16.7 To remove and fit the window mounting frame and window assembly. 41
16.8 To remove the window assembly. 41
16.9 To remove the fuel effect. 42
16.10 To remove the ceramic side walls. 42
16.11 To remove the electronic ignition generator. 42
16.12 To remove the complete burner unit. 43
16.13 To remove the thermocouple interrupter block 43
16.14 To remove the pilot unit. 44
16.15 To remove the shut-off tap. 44
16.16 To remove the gas flow rate controller. 45
16.17 To replace the burner. 45
16.18 To remove the main burner injector. 46
16.19 To remove the appliance from the fireplace. 46
© GDC Group Ltd. 2012