Valor Hamlet Multifuel Stove
21
OPERATING INSTRUCTIONS
DE-ASHING (RIDDLE)
It is necessary to maintain an ash layer on the
upper surface of the grate bars, in order to protect
them so de-ashing should cease as soon as the first
red embers drop into the ash pan. Further de-ash-
ing will cause heat build-up under the grate, which
will considerably shorten its life. This operation
should be carried out with the doors closed to pre-
vent dust escaping into the room.
•Move up and down vigorously the riddling
lever (ash will fall into the ash pan beneath
the grate). See Fig. 20.
•When de-ashing is complete re-set grate to
previous position.
• Empty the ash pan.
Note: Do not force the riddling lever
.
ADJUSTING AIR INLET CONTROLS
The operating tool can also be used to adjust the air
inlet control knobs relating to the airwash and the
primary air inlets. Use the fork end of the tool,
place side onto the knob and push un the desired
direction as in Fig. 22 & 23.
MAIN FIRE DOOR HANDLE
A stove mitten is supplied with your Valor Hamlet
multifuel stove, this is provided for the operation of
the fire door handle whilst the stove is in use. Care
must be taken when opening and closing the fire
doors as any surrounding areas of the stove will be
very hot.
Warning : Never attempt to open the fire doors
whist the appliance is in use, without the use of
the stove mitten or suitable gloves, serious
injuries may occur.
Fig. 22. Adjusting Primary Air Inlet
Fig. 23. Adjusting Airwash Controls
