10
Planning
Overview
Mantel—see pages 11-12
1100M engine
Framing—see pages 13-25
1/2” thick non-combustible board or equivalent—
NOT supplied—see Wall Finish on pages 26-27
Supplied as vertical outlet,
fi
eld-convertible
to horizontal outlet—see page 41
Remote Handset Wall Holder
Remote battery
& Wall switch
(required)
35-foot wire
lentgh (supplied)
Trim with barrier screen
(required)
Fixed Framing Kit 1130FFK
or Clean Install Kit 1130CIK
install at framing stage and
allow non-combustible wall
fi
nish to
fi
nish up to it.
All other trims
overlap
the surrounding non-
combustible wall
fi
nish
and are adjustable to
accomodate material up
to 3/4” thickness overtop
of the base 1/2” non-
combustible board. For
material thickness greater
than 3/4”, the appliance
requires repositioning
further forward in the
framing cavity—see pages
20-25.
Wall Finish.
Any wall
fi
nishes applied over
non-combustible board must
also be non-combustible—
see pages 26-27.
Combustible mantels are ok
provided they conform to
chart on page 11.
Non-combustible hearth
—see Framing on pages
14-16
Combustible
fl
oor
1/2” Micore supplied with appliance.
Use as a thermal break between non-combustible
hearth material and combustible material underneath.
See required hearth clearances on page 16.
Combustible Framing Allowed Beneath Fireplace.
Do not install the appliance directly on carpet.
Note: This appliance may be installed in outdoor, weather protected environments as
de
fi
ned in the GV60CKO Outdoor Conversion Kit instruction manual.
WARNING
HOT WALL SURFACES! The wall directly
above the fireplace is constructed of
non-combustible materials and, although
safe, it may reach temperatures in excess
of 200° F (93° C) depending on choice of
trims. Do not touch. Finish the wall using
materials suitable for these temperatures.
WARNING
HOT HEARTH SURFACES! The hearth in
front of the fireplace may become very
hot. Locating the appliance higher than
the surface of hearth and installing the
barrier screen will reduce temperatures.
Note that some materials, although safe,
may deteriorate due to heat—carefully
evaluate which materials to use.
Optional HeatShift System 4 x 5” Ø
outlets—see pages 83-101
