Valor H5 1100MN, Руководство для владельцев жилья

Страница: 22 / 30

22
Appendix A-Remote Control Operation
Remote Control Operation
NOTE: Before using the remote control system for the first time, the receiver and the handset must be paired. See
the section Remote Control Initial Pairing on the ȴ rst page of this manual.
Main Display
To Turn O
΍
Fire
Press to turn OFF.
Note: There is a 2 minute delay after
switching o
΍
before the next ignition is
possible.
Flame Height Adjustment
To increase ȵ ame height, press and
hold .
To decrease ȵ ame height, press and
hold . You may hold the button
down until the
ȴ re is set to pilot ȵ ame
only.
CAUTION: Always check the ȴ re and pilot visu-
ally to ensure they are o
΍
.
AM
ON
OFF
PM
AM
Thermostatic Mode
Signal Indicator Child Proof
Light
Fan (if included)
Program Mode
Temperature
Time
Auxiliary Feature (not used)
Countdown Timer
Battery Status
Eco Mode
°F or °C
To Turn On Fire
One-Button lighting (default):
Two-Button lighting: +
simultaneously
Press and hold for 4 seconds, until 8
short beeps and a blinking series of
lines con
ȴ rms the start sequence has
begun. Release button.
Main gas ȵ ows once pilot ignition is
con ȴ rmed.
Handset automatically goes into
manual mode after main burner
ignition.
Standby Mode (Pilot Flame)
Press and hold to set appliance to
pilot
ȵ ame.
NOTE: When pilot ignition is con ȴ rmed, motor
automatically turns to maximum ȵ ame height.
CAUTION: If the pilot does not stay lit after
several tries call your local service technician or
gas supplier.
(not used)
Note: Before using the remote control system for the first time , the receiver and the handset must be paired.
See the Remote Control Setup section in the Installation Manual.