background image

14

Cleaning your fireplace

Cleaning glass mineral deposits

A by-product of the combustion process in a gas 

fi

 replace is a mineral which can appear as a white 

fi

 lm 

on the ceramic glass windows of your appliance.
The composition of the deposit varies depending on 

location and time, and can appear intermittently.
There is no de

fi

 nitive solution to this issue. Various 

cleaning products have been tried with varying 

results. The following are recommendations only and 

cannot guarantee results.

Note:

 Mineral deposits occur naturally and are not 

covered under the Valor

®

 warranty.

• Clean the glass regularly to avoid a buildup of 

fi

 lm 

from mineral. If the 

fi

 lm is left for a long period of 

time, it can etch the glass, making it much harder, if 

not impossible, to remove.

• Never use an abrasive cleaner or ammonia-based 

cleaner on the ceramic glass. Any abrasion of the 

surface can compromise the strength of the glass. 

An emulsion-type cleaner is recommended.

• Use a soft damp cloth to apply the cleaner. Dry the 

glass with a soft, dry, preferably cotton cloth. Most 

paper towels and synthetic materials are abrasive 

to ceramic glass and should be avoided. Follow all 

instructions on the bottle/container.

• Our dealers have experienced good results from the 

products listed below. We cannot, however, guaran-

tee results of these products.

 

»

Brasso, Polish Plus by KelKem, Cook Top Clean 

Creme by Elco, White O

  by Rutland, Turtle Wax

Do not clean the glass while it is hot

• Always securely replace the windows and the barrier 

screen before lighting (see next page).

• If broken, glass panes may only be replaced as a 

complete window unit as supplied by the manufac-

turer.

• If the barrier screen becomes damaged, it must only 

be replaced with the same model and version barrier 

from Valor.

Cleaning other parts

• Clean the steel trims with mild soap and warm water. 

Any alcohol/solvent-based cleaner may weaken and 

damage the coating.

• Clean the barrier screens by dusting with a soft 

brush.

• Clean the 

fi

 rebox ceramic fuel bed and walls by 

dusting them with a soft brush or vacuum cleaner. 

Dust and soot can also be removed from the burner 

and logs using after removing the ceramic logs.

 

Minor amount of soot developing on logs is common 

but soot that builds up, falls o

  and accumulates 

indicates that the burner needs adjustment or the 

logs may be installed correctly—see 

Checking pilot 

and burner 

fl

 ames

 on page 17 or 

fi

 replace's 

Installation Manual for proper log placement.

When cleaning, make sure that no particles are 

brushed into the slots of the burner. 

Log position

Log position is important in your Valor 

fi

 replace 

because it can optimize the beauty of the 

fl

 ame and 

the combustion e

  ciency of your 

fi

 replace.

To reinstall the logs after cleaning or other 

fi

 replace 

maintenance, refer to your 

fi

 replace's Installation 

Manual for speci

fi

 c instructions on how to place them 

for optimal operation. If you are not comfortable 

performing this task, please contact your dealer.

Caution

Choking Hazard! Make sure the fireplace area is 

clear of firebed small particles to avoid ingestion 

by small children. Vacuum thoroughly around 

the fireplace area after cleaning.

WARNING

Risk of severe burns! The glass windows 

are very hot during operation. Ensure the 

fi

 replace and glass have cooled o

  before 

touching them.

Содержание H5 1100MN































Отзывы: