6
SETTING PROGRAM TIMERS
You can program two periods of time between 12:00
am and 11:50 pm in each 24-hour cycle.
The Programs P1 and P2 must be set in the following
order during a 24-hour cycle: , ,
and .
The icon indicates the beginning of the period (ON)
and the icon indicates the end of the period (OFF).
If = or = , the programming is
cancelled.
To keep the fi replace ON all night, set at 11:50
am and at 12:00 am.
Default settings:
Program 1: 6:00 am 8:00 am
Program 2: 11:50 pm 11:50 pm
Briefl y press SET button to scroll to
TIMER mode.
Hold the SET button until
(sun) is displayed and the time
fl ashes.
Briefl y press SET button to scroll to
TIMER (moon) while the time
fl ashes.
Press (large fl ame) button to set
the hour.
Press (large fl ame) button to set
the hour.
Press (small fl ame) button to set
the minutes.
Press (small fl ame) button to set
the minutes.
SETTING P1 ON TIME
SETTING P2 ON TIME
Briefl y press SET to scroll to TIMER mode (sun)
while the time fl ashes.
Follow the instructions given to set P1 ON time.
SETTING P2 OFF TIME
Briefl y press SET to scroll to TIMER mode
(moon) while the time fl ashes.
Follow the instructions given to set P1 OFF time.
Press OFF button to save these settings. The timers
are programmed. See the diagram on programming
sequences on the following page.
Tip
If you want to program only one period, program
and with desired times and program and
with the same time as .
SETTING P1 OFF TIME
P1
P1
P1
P1
P1
P1
P2
P2
P2
P2
P2
P2
P1
P1
P1
P1
P1
P1
P2
P2
P2
P2
P2