4
•
Briefl y press SET button to scroll
to (fan) mode. Fan and Level
icons fl ash.
•
Press (large fl ame) button to
switch ON and increase fan speed.
•
Press (small fl ame) button
to decrease fan speed. To turn
OFF fan, press (small fl ame)
button until all 4 speed level bars
disappear.
NOTE:
8 seconds after the fan has been set, the
handset will automatically go into temperature
control mode. The fan starts 4 minutes after
the gas opens (from OFF or from pilot) at
maximum speed and goes to the displayed
level after 10 seconds. The fan stops 10
minutes after the gas is OFF or at pilot.
-
Circulating Fan
-
The circulating fan has 4
speed levels from low (1 bar) to high (4 bars).
CIRCULATING FAN OPERATION
(if equipped)
- Nighttime Setback
Temperature Mode
(Appliance must
be in standby mode; pilot ignited)
-
The room temperature is measured
and compared to the Nighttime
Setback temperature. The fl ame
height is then automatically adjusted
to achieve the Nighttime Setback
Temperature.
- Timer Mode
(Appliance must
be in standby mode; pilot ignited)
-
The timers P1 and P2 (Program 1,
Program 2) each can be programmed
to go ON and OFF at specifi c
times. For instructions see Timer
Programming Mode.
NOTE:
The display shows the set temperature every
30 seconds.
T E M P
TIMER
Tip
Set the diff erent parameters when they are fl ashing.