21
Installation
Liner Panels
7. Replace the burner cover. Place the rear end of the
cover
fi
rst and drop the front of the cover down.
Replace the 2 screws at rear.
8. Place the left and right base panels at the front of
the unit.
These are included with the
fi
replace.
(Discard the base panels supplied with the liner
panels). These will be needed for all fuel beds to be
installed.
9. The base panels come packed with a rectangular
cover plate measuring 1-1/2”x14-3/8”. This plate is
only used with the 1000DWK Driftwood Log Kit (see
page 25). If using the 1000BLK (Birch) or 1000LSK
(Traditional) log kits, you may discard or recycle this
plate.
Use with
1000DWK only
Use with
1000BLK
1000DWK
1000LSK
