Valor 780JN, Инструкция по установке и эксплуатации

Страница: 7 / 46

Hot Glass Plate
Owner’’s Information
3. Apply light hand pressure against the window frame
sides to bed-in the window seal.
4. If the Hot Glass Warning plate has been removed
from the front lower corner of the window,
reinstall it by sliding it between the glass and
the frame as indicated.
5. Reinstall the access side doors to the  replace.
6. Rehook the front trim  tted with the barrier screen .
Checks
A periodic check of the pilot and burner  ames should
be made. Check after the  re has been on for at least
30 minutes. The pilot  ame must cover the tip of the
thermocouple probe. The main burner  ame pattern will
vary from appliance to appliance depending on the type
of installation and climatic conditions.
Rocks
Correct Flame Picture
Pilot Flame can be
seen between twig
and rocks
The appliance area must always be kept clear and
free from combustible materials, gasoline and other
 ammable vapors and liquids.
Inspect the vent terminal outdoors regularly to make
sure that snow, trees, bushes, leaves, or other objects
do not obstruct it.
Examine the vent system and terminal regularly. We
recommend annually.
Remote Control Handset Wall
Holder
Your  replace equipment includes a wall
holder to store the handset. If it hasn’’t be
installed, refer to the instructions further
on in this manual
for the installation.
Pilot
Flame
Thermocouple
Probe must be
in Flame
Correct Flame Picture
Logs
Pilot Flame can be
seen between logs
WARNING
FOR SAFETY PURPOSE, ensure the barrier FOR SAFETY PURPOSE, ensure the barrier
screen is re-installed on the fireplace front screen is re-installed on the fireplace front
after maintenance. after maintenance.
!
7
OWNER’S
INFORMATION