7
AUTOMATIC TURN DOWN
AUTOMATIC SHUT OFF
LOW BATTERY INDICATION
HANDSET / RECEIVER MATCH
Remote handset:
The battery icon will show
when the battery needs to be replaced.
Replace with one 9 V
alkaline
battery.
Receiver:
Three short ‘beeps’ will sound when the
motor turns when the batteries need to be replaced.
Replace with four 1.5 V
alkaline
batteries.
The remote control handset and receiver are program-
med to function together. In case of a replacement of
the handset or the receiver, you will need to reset the
receiver to allow them to function together. Contact your
dealer for details.
•
No communication.
If there is no communication
between the receiver and the handset for a period of
6 hours, the appliance goes into pilot mode.
•
No change in
fl
ame height.
If there is no change
in
ame height for a period of 6 hours, the appliance
goes into pilot mode.
NOTE:
In
TEMP
or
TIMER
modes, the
ame height
will vary according to room temperature. The appli-
ance will continue to work normally. However, if the
room temperature remains the same for 6 hours, the
appliance will go into pilot mode.
•
Low batteries in the receiver.
With low battery
power in the receiver the system shuts off
completely.
NOTE:
This does not apply when the power supply
is interrupted.
•
No change in pilot.
The appliance shuts off
completely when it is continually in pilot position—
without any change—for a period of 5 days.
Timer Programming Example
(default temperatures shown)
6:00 a.m.—
P
1
Start time
4:00 p.m.—
P
2
Start time
6:00 a.m.—
P
1
Start time
8:00 a.m.—
P
1
End time
10:00 p.m.—
P
2
End time
Set temp 74
F
Set temp 40
F
Set temp 74
F
Set temp 40
F
ᄗ
ᄗ
ᄗ
ᄗ
ᄗ
ᄘ
ᄘ
ᄘ
ᄘ
Miles Industries Ltd.
190–2255 Dollarton Highway, North Vancouver, BC, CANADA V7H 3B1
Tel. 604-984-3496 Fax 604-984-0246
www.valor
fi
replaces.com
Because our policy is one of constant development and improvement, details may vary slightly from those given in this publication.
CAUTION
DO NOT USE
a screwdriver or other metallic object
to remove the batteries from the battery box or the
handset! This could cause a short circuit.