
1
GV60 MAX
O
PERATING
I
NSTRUCTIONS
The GV60 MAX Electronic Ignition Remote Control
system is used on the Valor heaters
models 700, 780 and 785
July 2012
Remote Control Initial Set-up
The receiver and the handset of the remote control sys-
tem must be initially synchronized before the
rst use.
1. Insert alkaline batteries in the remote control
receiver and handset. The receiver is located left of
the control valve under the burner module.
2. With a sharp object, press and hold the receiver’s
reset button until you hear one short and one long
beeps. Release the reset button after the second
beep.
3. Within the subsequent 20 seconds, press the small
ame button ( ) on the remote handset until you
hear two short beeps con
rming the sychronization
is set.
This is a one time setting only and is not required when
changing the batteries in the remote receiver. The
remote control system is now ready to use.