28
28
Packing Contents:
1 Wall Bracket A
2 Screws B
1 Screw C
2 Wall Anchor D
1 Spacer E
(detach before assembly)
1 Wall Bracket F
Switch Plate
Alternative 1
Alternative 2
Alternative 3
Read the Safety
Information
section on page
4 of this manual.
Operating Your
Fireplace
For your safety, this appliance is
fi
tted with a
fl
ame
supervision device which will shut-off the gas supply
if, for any reason, the pilot
fl
ame goes out. This device
incorporates a
fi
xed probe, which senses the heat
from the pilot
fl
ame. If the probe is cool, the device will
prevent any gas
fl
ow unless manually lighting the pilot.
See full lighting instructions on page 34 of this manual.
Owner’s Information
Performance of LPG appliances may be affected by
the quality of commercial gas supplied in your area.
Cleaning
Important - Glass cleaning - Mineral deposits
One of the by-products of the combustion process in a
gas appliance is a mineral which can show up as a white
fi
lm on the ceramic glass of the window.
The composition of the deposit varies widely from various
locations and also from time to time in the same location. It
seems this is associated with the varying sulfur content of
the gas. You may have the problem for a time and then not
see it for many months when it will reappear in your area.
We have discussed this problem with ceramic glass
manufacturers and they cannot give us a de
fi
nitive
answer to this problem. Dealers have tried various
cleaning products with varying results. The following
recommendations does not guarantee results in your
particular case.
NOTE: This is a problem beyond Miles
Industries’ control and is not covered under
warranty.
• Clean the glass regularly as soon as you notice the
buildup (white
fi
lm). If the
fi
lm is left for a longer period
of time, it will bake on. It is then much harder, if not
impossible, to remove.
• NEVER use an abrasive cleaner
on the ceramic
glass. Any abrasion of the surface has the immediate
effect of compromising the strength of the glass. An
emulsion type cleaner is recommended.
You’ll
fi
nd
your Warranty
Card at the
back of this manual.
CAUTION
Your
fi
replace becomes very hot when operating.
Your
fi
replace becomes very hot when operating.
Avoid placing decorating objects sensitive to heat
Avoid placing decorating objects sensitive to heat
within 36 inches (0.9 m) around it.
within 36 inches (0.9 m) around it.
WARNING
DO NOT TOUCH THE GLASS WHILE IT IS HOT!
DO NOT TOUCH THE GLASS WHILE IT IS HOT!
Let the
fi
replace cool
fi
rst before cleaning it.
Let the
fi
replace cool
fi
rst before cleaning it.
Do not put
furniture or other objects
in this space in front of
the fireplace:
36” (0.9 m)
Fireplace
Hearth
Remote Control Handset Wall Holder Installation
The remote control kit for this
fi
replace comes
complete with a wall-mounted holder. This
holder is not required in all installations but
is provided as an optional feature for those
customers who wish to mount the remote
handset to the wall.
To install the holder to the wall,
fi
nd a
convenient location and use the hardware
provided with the kit. See the diagram on the
right for required hardware and con
fi
gurations.
Note that the holder can be installed at the base
of a light switch plate.
IMPORTANT
. The location of the remote control
handset is important to assure proper temperature regulation. To obtain a constant temperature, we recommend that
the handset should be between 3 and 15 feet away from the appliance
but not directly above it
. We also advise
that the handset should be located away from any other heat source and not in direct sunlight as this may affect the
temperature sensor located in the remote handset.
