OWNER’S GUIDE
Page 11
With Spring clips
With screws
Figure 10 Homestyle top casting & tiles removal
SERVICING & MAINTENANCE
•
In order to achieve and maintain high levels of personal safety and performance
efficiency it is essential that the flue terminal outside the building is kept clear of any
form of obstruction.
•
We recommend that all gas appliances and their flues, are checked annually by a
competent person (in the UK a CORGI registered installer).
•
In the United Kingdom it is the law that a landlord must have any gas appliance, flue
and pipework which is situated in a tenant’s premises checked for safety at least every
twelve months.
Battery Replacement – Colourway & Homestyle Only
These appliances use four 1.5V AA batteries.
•
To change the batteries remove the bottom
front casting. The battery case is at the right side.
Lift the plastic battery holder out of the metal
case and detach the batteries. See figure 9.
Fitting Tile sets – Model 5402 Homestyle
Only
A wide range of alternative tile designs are
available from your supplier.
To change the tiles:-
•
The top casting will have to be removed to insert the tile set. Some appliances have
the top casting secured to the sides by screws. Other appliances have the top secured by
spring clips. If the top is
screwed to the sides, unscrew
the two screws at the top of the
side castings until they are
loose enough to allow the top
to be lifted off. There is no
screw thread in the top casting,
only in the side castings (See
figure 10). If no screws are
visible, the top can be
removed by pulling it firmly upwards to release the spring clips (See figure 10).
•
Remove the complete tile cassette by sliding the cassette channel up and out of the
front casting. See figure 10.
Alternatively, remove the tiles individually by sliding them up out of the cassette
channel. This second method will have to be employed if a shelf above the fire is too low
to enable the channel to be slid clear.
Figure 9 Battery replacement
(Illustration shows Homestyle front)
