6
Appliance Preparation
Detach the window.
Refer to the Installation Instructions supplied with the 530 Engine.
Check ignition spark.
Refer to the Installation Instructions supplied with the 530 Engine.
B-Vent Conversion Kit Installation
Remove the rear outlet vent collar and seal
by unscrewing 12 screws.
Fit the rear cover plate (supplied with the
kit) using the seal and 12 screws previously
removed. The hole in the cover plate must
be nearest the top edge.
1.
.
Remove 4 screws from the case back (2 each
side just outside of the cover plate). Fit the
adapter unit to the case using these screws.
Fit a “P” clip at the bottom rear right corner of
the appliance case. Fit the vent switch wire to
the clip. Feed the wire into the case through the
hole at the bottom corner.
3.
4.
