42
WARNING
CHOKING HAZARD!
Ensure that the
fi
replace
area is clear of
fi
reglass particles as these could
be ingested by small children. Vacuum area after
installation.
!
Installed tray
Edge of tray
fl
ush
with edge of
fi
rebox
Small round
hole at rear
left of
fi
rebox
Pilot shield
Pilot shield
Fireglass installed—top view
Top
Bottom
Installation
Install Decorative Glass Set 1500DGS
Material required
• Middle platform brackets (supplied with set)
• Small container to distribute
fi
reglass (not included)
• Decorative Glass Set, which contains:
◊
3 bags of crushed glass
◊
1 metal tray for glass
IMPORTANT:
Approved for use only with the
fi
reglass
provided with your Valor
fi
replace or the
fi
reglass
brands
American Fireglass
™ or
fi regear
. The use of
any other
fi
reglass products may void your
fi
replace
warranty.
Installation
Carefully unpack the kit.
1. Install both platform brackets in front of and behind
the burner, with the tabs downward
fi
tting the
bracket tabs into the burner support’s slots as
indicated.
2. Install the metal tray on top of the brackets as
indicated. The tray, when installed properly, is
fl
ush
with the front edge of the
fi
rebox opening. As well,
the small round hole in the tray should be at the rear
left when facing the
fi
rebox.
3. Carefully spread the
fi
reglass in the tray and on the
burner. Do not over
fi
ll the burner to avoid blocking
the burner ports. Ideally, one layer of
fi
reglass on
the burner is suf
fi
cient.
NOTE:
Ensure the area around the pilot shield is
not piled too high with
fi
reglass and also ensure the
area
within
the pilot shield is clear of
fi
reglass.
QUALIFIED
INSTALLER
Содержание 1500INO (NG)
Страница 56: ......
