12
Remote Control Operation
MANUAL MODE (HANDSET))
TO TURN ON FIRE
W
ON
AM
PM
OFF
Handset One-Button Operation
(Default Setting)
ƒ
ƒ
Main
ƒ
Handset automatically goes into man-
ual mode after main burner ignition.
NOTICE
To change from one-button to two-button ignition operation,
go to page 1 for instructions.
ON
AM
PM
OFF
Handset Two-Button Operation
ƒ
Press
and
button simultaneously
until two short beeps and a blinking
-
quence has begun; release buttons.
ƒ
Main
ƒ
Handset automatically goes into man-
ual mode after main burner ignition.
To change from two-button to one-button ignition operation,
go to page 1 for instructions.
NOTICE
If the pilot does not stay lit after several tries, turn the gas control
knob to OFF (
3
) and call your local service technician or gas
supplier. See page 17 for more information.
OFF
STANDBY MODE (PILOT FLAME)
Handset
ƒ
Press and hold
button
TO TURN OFF FIRE
ON
AM
PM
OFF
Handset
ƒ
NOTE:
There is a 5 sec delay before
the next ignition is possible.
NOTICE
BEFORE OPERATING
Make sure MANUAL knob on the GV60 Valve is in the
ON
,
full counterclockwise
position.
FLAME HEIGHT ADJUSTMENT
ON
AM
PM
OFF
Handset
ƒ
T
hold
button.
ƒ
T
-
button.
DESIGNATED LOW FIRE AND HIGH FIRE
AM
ƒ
T
but-
ton. “LO” is displayed.
NOTE:
Flame
-
AM
ƒ
T
but-
ton. “HI” is displayed.
IMPORTANT:
If the display on the
handset indicates OFF, it may not
mean that the fire is off.
Always
check the fire and pilot visually
to ensure they are off.
Press button and hold for four
seconds until two short beeps and
a blinking series of lines confirms
the start sequence has begun;
release button.
Press button and hold for four
seconds to turn OFF.
OWNER’S
INFORMATION
