12
13
Balance & Fader
You can adjust the sound from left to right and from front to rear.
Loudness
This feature will increase the bass & treble level at lower volumes.
NOTE
: The Bass and Treble levels are only adjustable when EQ is on “User” mode.
The Loudness function increases the sound ranges from low level to high level.
Exiting the Equalizer Setting
Touch the return arrow on the top right corner of the screen or press the (
SEL)
button on the
remote control to exit the Equalizer setting.
System Reset
To reset the system in case of a halt or other unusual operation, use the tip of a pen to press the
RESET
button located on the front top-right corner of the unit. After the system resets, the unit
will restores the default settings before it was last powered off.
Mute
The volume can be mute by the following:
1. Press the MUTE button (
) on the remote control to mute the volume from the unit.
2. Press the /MUTE/VOL knob on the panel.
3. Turning the /MUTE/VOL knob counter-clockwise on the panel to decrease the volume level
to "0".
NOTE
: Press the
MUTE
button on the remote control again to restore the volume.
Adjusting the volume or using any of the audio set-up features will cancel the mute function.
Operation Instructions
Power On / Off
Press the
POWER /VOL
button to turn the unit on. You can also turn on the unit by pressing the
button ( ) on the remote.
Press and hold the
POWER/VOL
button on the front panel or press the
POWER
button ( )
on the remote to power off the unit.
Source Selection
Press the
SRC
Button on the front panel to change sources: TUNER, DISC, CARD, FLASH
DRIVE, BT-TEL, F-AUX, R-AUX, SETUP, and STANDBY. The name of the source is displayed
on the top right corner of the screen.
Volume Adjustment
To increase or decrease the volume level, turn the
POWER/VOL knob
on the front panel or
press the
VOL+/ VOL-
buttons on the remote control. The volume ranges from “0” to “40”.
Equalizer Setting
The Equalizer Setting allows you to easily adjust your audio system to meet your sound needs.
To get the best possible sound quality from your new system, be sure to adjust the settings for
the speakers as well.
Accessing the EQ Settings
Press the (
SEL
) button on the remote control or go to one of these audio sources MP3 DVD/CD,
Radio Tuner, MP3 SD card or MP3 flash drive to get access to the
icon.
Selecting an EQ for Adjustment
Press the ( / ) buttons on the remote control or press the
icons on the
front panel once, and
then select an audio setting to be adjusted.
Adjusting an Audio Setting
Press the ( / ) buttons on the remote or use the touch screen to adjust the selected feature.
EQ Settings (Jazz, Pop, Rock, Classic or USER)
