24
25
DVD Player Operation
NOTE
: When properly installed, DVD video cannot be displayed on the main screen unless the
parking brake is applied. If you attempt to play a DVD while the vehicle is in motion, the screen
will display “caution” with a blue background. Rear video output, (if used) will operate normally.
Insert/Eject Disc
Inserting a Disc
When inserting a DVD disc, DVD mode will be enabled and disc will begin to play.
NOTE
: If Parental Lock (Rating) is activated and the disc inserted is not authorized, a 4-digit
code must be entered or the disc will not play (see “Parental Lock Menu”).
You cannot insert a disc if there is already a disc in the unit or if the power is off.
NOTE
: CD-R/RW, DVD-R/RW, DVD+R/RW will not play unless the recording session is closed.
Ejecting a Disc
Press the button
on the unit to eject the disc. The unit will automatically revert to Tuner
mode at the same time.
Reset the Loading Mechanism
If the disc loads abnormally or does not play properly, press and hold the button
on the unit
to reset the loading mechanism. The disc should ejected and resume to normal operation.
Accessing DVD Source
To switch to DVD source when a disc is already inserted, press the “
SRC”
button on the remote
control until the DVD source appears on the top of the screen.
On the front panel press Menu and select the “Disc” icon.
Using the Touch-Screen Controls
: Press to Play/Pause
: Press to stop
: Press to fast reverse
: Press to fast forward
: Press to display Sub-title
: Press to switch among LEFT, RIGHT and STEREO.
tuning frequency one step at a time.
Using Preset Stations
12 preset buttons are used to save your favorite stations for each band. First 4 saved stations
(P1-P4) for the current band appear on the screen.
You can touch the arrow buttons
or
on the screen to see the other 4 stations.
Saving a Station
1. Select a band (AM/FM), and then select a station.
2. Press and hold one of preset (P1-P40) on the right side of the screen for three seconds. The
station will then be saved on the selected preset number.
Select a Station
1. Select a band (AM/FM).
2. Touch one of the presets (P1-P4) on the right side of the screen.
Auto Store (AS)
Press the AS button on the screen to automatically scan and save all stations in current band.
Program Scan (PS)
Press the PS button on the screen to scan through the stations in the 12 preset channels in the
current band.
Press any button to stop scanning and listen to the selected station.
DX and LOC Stations Signals (LOC)
When the Local function is on, only radio stations with a strong signal are found. When the Local
function is active, “LOC” appears on the screen.
Press
to activate the Local function in AM/FM tuner or to activate the DX function.
