4
5
Please
Preparations
Read all of the instructions below before beginning your installation. We recommend that you
have your unit installed by an experienced car audio/navigation system installer (MECP
certified).
IMPORTANT NOTICE
: It is very important that you read the
WARNINGS
and
NOTES
in this
manual to ensure correct installation and use of your unit.
Features
6.2" Digital TFT Display
DVD/DVD-R/DVD-RW/VCD/CD/CD-R/CD-RW Compatible
Touch-screen Control with Dynamic Graphic User Interface
Built-in 45W X 4 outputs amplifier, 4.1 channels surround sound output
Bluetooth with A2DP & Hands-free Cell phone use
AM/FM Tuner with 48 Memory Presets
SD Card Slot on Front Panel , Support SDHC-up to 32GB
Rear 2.0 High Speed USB Port (support max. 500 GB external hard drive)
Front and Rear Auxiliary
Back-up Camera Input
Steering Wheel Control Module Integrated (Analog)
Tools and Supplies
We suggest using these tools and supplies to install the unit.
Torx type, flat-head and Philips screwdrivers
Wire cutters and strippers
Tools to remove existing radio (screwdriver, socket wrench set or other tools)
Electrical tape
Crimping tool
Crimp connections
Volt meter/test light
18 gauge wire for power connections
16 – 18 gauge speaker wire
Heat shrinks tubing
Soldering iron and solder
Warning
1. Only connect the unit to a 12-volt negative ground system.
2. Never install this unit where operation and viewing could interfere with safe driving conditions.
3. To reduce the risk of a traffic accident (except when using the backup camera feature) never
use the video display function while driving the vehicle. This may be a violation of local laws.
4. Never disassemble or adjust the unit without the assistance of a professional. For details,
please consult your local car stereo/Automotive electronic specialist shop.
5. To prevent injury from shock or fire, never expose this unit to moisture or water.
6. Never use irregular discs, the only recommended disc size is a 12cm round disc.
7. To prevent damage to the mechanism inside this unit, avoid dropping the unit.
8. To ensure the touch screen is functioning properly please avoid hard impact to the TFT
monitor.
9. Do not change the fuse on the power wire without professional guidance. Using an improper
fuse may cause damage to the unit and result in a fire.
Playable Discs
The following types of discs/files are compatible:
CD-ROM (ISO), CD-R, CD-RW, DVD+R/RW, DVD-R/RW
CD-DA, DVD Video
MP3 data
WMA data
JPEG images
XVID Video
AVI format
MPEG 1&2 formats
The following types of discs/files are not compatible:
WMA files that are protected by DRM (Digital Rights Management)
WMA lossless format
Discs recorded with Track At Once or packet writing
MP3 PRO format
MP3 playlists
WAV format
Some recordable DVDs and CDs may be incompatible with this unit, depending on media type
and recording method.
DVD Region Management
Some DVD discs can be played only in certain playback modes according to the intentions of the
software developer. As the unit playing a disc according to their intentions, some functions may
not work as intended. Please be sure to read the instructions provided with each disc. This
player has been designed to play back DVD software that has been encoded for specific region
areas.
The unit will play discs labeled “All”.
DVD region codes:
1 - USA, Canada
2 - Japan, Europe, South Africa, Middle East
3 - Rep. of Korea, Taiwan, Hong Kong, Parts of Southeast Asia
4 - Australia, New Zealand, Mexico, South America
5 - Eastern Europe, Russia, India, Africa
6 – China
