RESOLVING PROBLEMS AND CLEANING
Important Safety.
Before undertaking maintenance or replacing the lamp always disconnect the stove
from the electricity supply by removing the 3 pin plug and allowing the stove to
cool.
How do I Clean my stove?
The stove and plastic parts need only to be wiped clean with a dry soft cloth, do not use
polishes or abrasive materials.
I have a problem with my stove!
1. My stove functions manually but not by the remote control.
The batteries in the remote control handset probably need replacing. See page 7.
2. My stove is on but there is no light / low light.
This is possibly a lamp failure. Remove the lamp as in the following section and check
it in a table lamp that is known to work. If it does not work in the table lamp then it
needs replacing as in the following sections.
The lamp fitted to this stove is a 60Watt B22, 230Volt clear bayonet lamp. Due to the
indeterminate life span and ease of replacement, they are specifically excluded from the
guarantee.
To replace the lamp.
!
We recommend that the floor is protected with a suitable covering to prevent
staining or discolouration by the coals.
!
Open the doors by pulling on the handles.
!
Remove all of the loose coal pieces from the top and front of the fuel support. Be
careful not to place the coal pieces onto decorative surfaces as they may cause staining
or discolouration.
!
Move the fuel bed forward and upward out of the way; you may have to hold the
fuel effect up whilst replacing the lamp.
!
Remove the faulty bulb.
!
Fit the new bulb.
!
Relocate the fuel effect.
!
Place the loose coal pieces on top and in front of the plastic fuel bed.
!
Close the stove doors.
Page 11
INSTALLER AND OWNER GUIDE
©
Baxi Heating U.K. Limited 2007.
All manuals and user guides at all-guides.com
all-guides.com
