Fitting the doors.
The stove is supplied with the doors removed in order
to prevent damage during transportation. Stand the
stove on its legs. Unpack the doors and hinge pins. Fit
the doors one at a time. To do this locate each door
over the stove hinge and secure in place by firmly
pushing a hinge pin into each door hinge (See figure
3).
Fitting the loose coal.
!
We recommend that the floor is protected with a
suitable covering to prevent staining or discolouration
by the coals.
!
Open the pack of loose coal and position the coal
on top and in front of the plastic fuel bed. Arrange the coal to your liking. It is not
necessary to use all of the coal.
Fitting the batteries to the Remote Control Handset.
The remote control handset uses 2 x
1.5V AAA type batteries. For longer
battery life use only alkaline batteries.
To install the batteries, slide the cover
down on the rear of the handset and
remove. The polarity of the batteries is
marked on the inside of the battery
compartment.
If the stove does not respond to the
remote control handset commands, it is
likely that the batteries require
replacement.
Please fill in the details on pages 13
& 14.
Page 7
INSTALLER AND OWNER GUIDE
©
Baxi Heating U.K. Limited 2007.
Figure 3. Fitting the doors
Figure 4. Battery cover removal
All manuals and user guides at all-guides.com
